1984 Pontiac Trans Am
Engine:
-406ci SBC
-LSRengineering custom 750cfm carb, -6AN fuel line, Jegs fuel PSI gauge
-Edelbrock Victor Jr. manifold #2975
-World Products Sportsman II heads, ported and polished, 10* locks and retainers, Comp cams Double Springs, Comp pushrod guides plates, ARP 7/16" rocker studs
-Howards cams camshaft 248*/254* .562/.578 lift on a 110LSA(ordered today)
-Comp cams Pro Magnum lifters
-Comp cams Pro Magnum Pushrods
-Comp cams Pro Magnum Roller rockers 1.5
-509 casting block (rarest 400 block)
-Cast pistons, rods, crank
-HEI distributor
-MSD Supercomp plug wires
-MSD Digital 6 plus box
-MSD coil in cap
-K&N breathers
Exhaust:
-Hooker Longtube headers/ceramic coated
Drivetrain:
-TH400, TCI 4200 stall converter, J.W. Ultra-bell, TCI transmission shield, manual valve body.
-Hurst Quarter stick shifter
-B&M SFI flexplate
-Custom length driveshaft for TH400
-Moser 9", 31 spline axles, trac lock with 3.50's
-LT1 disk brakes on the rear
-Mickey Thompson ET streets
Suspension:
-Stock struts(front)
-Competition Engineering 3 way adjustable shock(rear)
-Moroso trick springs in the front
-LS1 car springs in the rear
-UMI Lower Control Arms
-UMI Panhard Bar
-UMI TH400 swap crossmember w/ Tq arm relocation
-UMI 22mm rear sway bar
-UMI Swaybar adapter kit
Misc. other stuff:
-Edelbrock electric fuel pump #1791 and relay kit #1795
-Earls inline fuel filters
-Mallory 3 port return regulator
-Aeroquip stainless braided fuel line -8AN
-Powermaster XS torque mini starter(required for LT's)
-RECARO rear seats
-Dual Gauge A pillar pod.
--Sunpro Water temp gauge
--Sunpro Oil PSI gauge
-Autometer 3 3/8" tach
-A/C delete heater box
-Electric fan
-Custom switch panel
-Permacool Maxi-cool tranny cooler w/fan
-Summit coolant catch can
-Sumped fuel tank
-Dual oil filter relocation


