I don't really have any plans set in stone..

Only thing I NEED to do is my suspension before august.

If i ever have extra money id want a vararam air intake

but the economy sux and vette parts r expensive so i dont expect doin n e thing soon

Are those vararam intakes any good? I've seen them at parts joints before but I've never actually seen anyone that had one or heard anything from anyone using one.

i'm doing pretty damn good already. have a full fresh h/c/i on the way, along with a new tranny, shifter, new full exhaust and 4.10's out back. also have everything needed to do my 5 lug swap and mount my brand new wheels and tires that are still sitting in the box.

EDIT: oh yea, and full suspension too.

Figured I'd update it.

This year:

powder coat blower and valve cover
paint or powdercoat brake calipers
heat exchanger bought and installed
lowering springs bought and installed

If there is time and money left over, I'd like to start getting together my power stuff, but I probably won't install any of it until next year. I'd also like to go to the track and get a baseline run to go with my baseline dyno numbers...then I'll know how I improve.

Have everything, just need to get the car together.
Laser-
Forced Performance 4R Camshafts and Beehive Valvesprings (good to 9k rpm)
Shep Racing Stage 4 Transmission
Bosch 044 Inline fuel pump and Walbro 255lph in tank New An line tank to rail
FIC Fuel rail and Fuelab Fuel filter
Ceramic coated Header and turbine housing
Forrester Racing Heads Intake manifold
New power steering rack
-Hoping this takes me into the 10.5x range @ 135+ on 17" tires, Full interior, full exh and over 3,000lbs.

Mustang-
I hope to get the floor situation fixed and I would like to do an oil change on it in 2009 haha
Trade my Pony's for Old Skool Roh ZR-6's

Ram-
Already put on the 5", may stop there...If not S&B Intake and Edge Juice with Attitude
Eyelids and Debadge, 20% front tint

Miata-
Garage Vary front Lip
Hard Dog Sport w/single diagonal (roll bar)
Smaller steering wheel to make room for my legs.
Be nice to see a 4g63 in it.

well my list is esentially done!

just gotta get new performance brake pads for some stopping power and have my tubes installed in my slicks and off to the track I go..

looks like i'm doing better then i thought. i have everything here, ready to go. plus, i should be pcking up a fresh 347 stroker shortblock this weekend.

Car is gonna be nuts man!!!!! When can I drive it?





OH and I want a turbo for the Busa

My mod plans fizzled when Fina said "Lets go to Florida again"

haha, you're more then welcome to take it for a ride when everything is said and done. maybe not right away though, it's still gonna have the old king cobra clutch i already have in it. i'll hopefully get the rest of the summer out of it and throw something else in come winter time. i need some kind of rev extender too, because it's gonna have the anderson b41 cam in it, and i need to rev it to at least 64-6500 to make full use of the cam.

i'm stoked as hell though, because the car's gonna screaaaammmm.

hell yeah it is, you are gonna be loving it

the Chevy:

rebuild the blown tranny with Z-pak clutches, "The Beast" sun gear shell and Corvette servos. weld in the new cab corners, patch the door skins, replace the fenders, and get new tires for the 18" AR chromes..

the Jeep: 5 speed swap and change gears to 4.10's. everything else i wanted to do to it has been done over the past couple weeks.... 94 cherokee interior swap, sprayed grille and headlight bezels black to match the truck and replaced the broken right side bumper end cap. removed all side mouldings. Grant GT steering wheel and horn button with Jeep on it on order, clear corners on order.. oh and i need to find a 96 - 00 Jeep 2.5 MPFI engine and fab up a turbo kit for it..

can't wait, just need this guy to stop putting it off so i can go get this shortblock before i just throw it together on my stock shortblock haha. i'm anxious as fuck hahaha

I think I got it

FWI for the GP and maybe some exhaust work (Down pipe, cat back, headers if money is right)

The beast gets a new cab corner, fix the exhaust leak, a new cat and cut out the pre cat, and maybe some add a leafs in the rear

scratch the 347, it's got inline valve reliefs, and i have twisted wedge heads. shit, that sucks.

im gonna light my car on fire

Sweet! Take a video

i got big mod plans lol already started the stroker motor swap and it will b done in a week nd next is gt35r any other suggestions if anyones got em would def like the help and ideas on a turbo upgrade selection lol and i got a few more things like gettin a different exhaust and bov :-D and i posted in the wrong sextion haha my bad

granted i get the MS3 this year will just be exhaust, and cai.

Max: Rebuilt tranny, Exedy Stage 1 Clutch, Fidanza flywheel. (done in Feb. 2009) New leather boots for the shifter and eBrake, as well as an i30 leather wrapped eBrake handle (thanks Neil!) New Momo Race lightweight steering wheel, with custom remote located cruise controls. (Done last week..) Upgraded sub amp from Alpine MRP-M350 to a MRP-M500, installing this weekend. P10 headrests, but I think Im pulling them back out.. looking for a perforated leather i30 black interior. Completing the LED conversion on ALL lights. Possible trunk-work in the near future. Underhood polishing and detailing.. etc. It's always something! lol

Blazer: Rear window spoiler from Lund.. I think thats about it, so far.

GSX-R: Fixed it over the winter, following an accident last September. It's back on the road now, already ridden a few times this year! Spiked bar ends FTMFL!!

Hey wait, it looks the same as it did 3 weeks ago




Fail.

Pulling my tranny on tuesday, for a rebuild and a upgrade torque converter, a TCI breakaway 10" 2600 stall. Cars been sitting on jack stands in my garage for 18 months, can't wait to test the converter at New England Drag Way.

Hahahaha I'll be amazed if that happens

For me:
Ported E7 Heads w/Proform RRs
Weiand Stealth Intake
Holly 750cfm Carb
Headers
Solid Motor/Tranny Mounts
High Flow Oil Pump
New Cam, not sure what kind yet
New Clutch, not sure what kind
FRPP Valve Covers
AC Delete
Hardened Pushrods
Aluminum Water Pump
SS Bolts
Speed Pro Hyperotectic Pistons
New Flywheel
New Lifters
New Oil Pan
Fresh Oil Change
Maybe relocate the battery to trunk
Maybe wire tuck

Then I'll do springs, finish the interior, new brakes/rotors, headlights, wipers, etc.