ok so ive posted this before and lost track of it im going to be out working on car tommorow and need help i have a 91 crx with a b16 swap car runs mint i fixed brake light problem now need help with cluster nothing on cluster works and when u turn on headlights car goes from full tank of gas to empty then when u turn lights back off it goes back to full i have no tach no gas readin no temp no clue what it can be please helpppppppppppppppppppppp

dont know much about that stuff but i do know on my crx i used to have to shut my headlights off to see how much gas i really had. that was due to a bad ground. but my rex wasnt swapped. it was the stock si d16

well come by im in middletown tommorow lets see if we can fix it

Th first thing you need to do is get yourself the right wiring scrematic for your car. Then its just a matter of tracing your wires back wo the proper place. I have no idea what a B16 swap is so please explain to me so I have an idea of what you did.

well i did nothing but the car has a swapped b16 jdm tranny ecu and motor are all from japan but everyone thats looked at it has said it was all done right but its jus the cluster im having a problem with

So your saying you got the car withthis wiring issue already? You first need to get some wiring diagrams. They will be your best friend here. Somewhere along the swap, someone(s) made a mistake I bet in the wiring. it could be something as simple as a ground wire or just a break in a wire. Do you know how to properly read a wiring diagram to a car? Do you own a GOOD multimeter?

never read a diagram and dont own any kind of electrical tools

ummm, then you might be in trouble here. No one is going to be able to help you out over the internet with this. This is gotta be a hands on thing and it might take a while to go through all the wiring. I wish I could help you more now but I just dont have anything to go off of

r u willing to come down and see what u can figure out because im stumped right now no clue

I lead a very busy life bud. I wish I could find time to work on my own shit. Is your cars dash taken apart at the moment? If not then maybe you can try pulling the cluster out while its still connected electronically and see if you can investigate. you might find something. Also look under the dash, there may be some issues there. Just do as much as you possible can and get the proper diagrams.

im gonna investigate a little tommorow cuz it seems like evertime im under the dash looking for something theres another plug undone i just dont understand why it lights up but doesnt work

ok so i dont know if this is the problem hopefully someone can help i have no hazard switch hooked up in my car does anyone think that could be the problem?

start with simple shit first... do u have good fueses????

checked all fuses and all grounds yes

go on www.honda-tech.com and ask there, they can trouble shoot anything